User's Manual

12
Getting Started
Powering the Base Station
Important: Before installing or handling batteries,
read the Battery Safety Instructions on page 8.
The base station uses 4 AAA alkaline batteries for
optional backup power (batteries are included with
some models). To install the batteries in the base
station:
1. With the bottom of the base facing you, press the
cover latch with a screwdriver to lift and remove
the battery cover.
2. Insert 4 AAA alkaline batteries into the battery
compartment.
3. To replace the cover, insert the tabs of the cover
into the slots on the base station and press down
until the cover clicks into place.
4. Plug the power cord into the back of the base
station and into an outlet.
1041b65o.book Page 12 Friday, March 7, 2003 11:36 AM