Congratulations on your purchase of & Motorola product! Product registration is sn important step. Registered flips us Facilitate warranty service and permits us 16 contact you if your Motorcar product reduces ar update or other service “To registrar your product online, visit sor rotors a, con warrens Please retain your original dated sales receipt for your records, For warranty service of your Motorola ‘product. you will need to provide a copy of your dated sales receipt to confirm warranty status.
Contents Handset CORIOLIS vo ovevransoiveisinierie 2 FCC and Interference Information Important Safety HUTCHINSON «cv cer err cur nee 8 Gelling Ste ooo) Powering the Base Station 12 Setting Up the Charging Bases... 1 longstanding Batteries in the Handsets a3 Charging the Handsets... 13 Phone Ling Connection... 1. 1... ceca 1 Wal Molding the Base Station, ANON Removing tie Base Station and Wall Mount Fleming fhe Base Station from the Wal Mauro Using the Handset Display... Using the Sat Keys...
Getting Started To set up your Motorola digital cordless system: 1. In stat optional backup batteries in the base station and plug inch & power outlet (page 12). 2. Plug in charging bases for expansion handsets (page 13}. . Install batteries in handsets (page 13% 4, Charge handset batteries (page 13) A rechargeable Ni Cd battery powers each handset. Charge tha battery for about 12 hours. before initial use. . Connect the base station to the phone koe (page 14}. 5.
Setting Up the Charging Bases For the initial charge, charge the battery for at i least 12 hours, If you have expansion handsets, they do not need to be plugged into a phone line. Simply plug the power orc ito tne back of the charging base ang into an autistic wherever you wait xa pace the handset.
Plug the phone cord info the phone jack ors he wall. Hold the folded cord at the peter and insert it into 7. Plug the power cord inch & power outlet f iris hot the back of the wall mos bracket. already plugged in. ol 8. berths the four tabs on the wall mount into the four slots on the back of the base station and push until it snaps ita place. Getting Started Hang the wall mount bracket on the fan wall nine.
Removing the Base Station from the Walt Mount Press the release tab located above the bottom resew hole on the wall mount. Using the Handset Display When the handsets notion uss, the display shows the standby screen. ? me Ate awry meter 3 ise bang 2 & Number of finger of Catt 1D 1 acids Sett soft key rotation Fig soft kay function Note: Geller ID information is supplied only Jf you subscribe fo cater i service from your facial phone company. When the handset speakerphone is on, 49 appears on the display.
Setting Up Your Phone Registering an Expansion Handset You can have up to 4 handsets registered fo a base station Hf you ry to register a 5 handset, Unable Lo Resister displays. Handsets that come with your MD450 Series phone system ara already registered. You only need 10 register handsets You buy Expansion handsets ad 10 your phone shyster. “To register a new expansion handset that has fiver been registered to a base station before: Fr 1 Press OK (CD) 2 Within & seconds of step 1.
} 10 advance to the Phone book Tone. This is the sound for incoming calls from numbers stored in your phone book. You must subscribe to caller ID service for this ing tone to work. Press CHANCE (G25] to scroll through the phonetician roles. Each tone plays a you select CHANGE (G0). Stop at the phonograph (ore you want © set. & Bros DUNE (G0), 16 Brass EXIT (G55) to ref 16 he standby screen. or 10 scroll o & different menu option.
Tarting 2 Handset When you register a handset, iris assigned a default fame of Handel( x}, where xan ba 1, 2.3, ar 4. You an change the name to something more useful, for example a location (Lichen) or someone's name (Susan). Naming & handset makes it easy to select the handset from a Hist (for example, to intercom another handset).
x 11h format Yau have to dial the 1 + S-digit area aced + 7-dig pong number io call rumbas in this area coda. For example, i you store 854 in 10-dig format, when you receive a call from that area cud. the phone Fumier is stored in your call fist with al 10 dis. The number will hen be in ihe correct format for you to dial directly from the call list without any reformatting 1 Pres MEN (CG 2 Scoliosis area code and press SELECT (G1 3 Enter he first area code 4 Ross FORMAT (ca) to Se roll Through the. formats.
Setting the Language 2) 1 Crass MERE (G0). 2 Ecol Io Langland and press SELECT 3 Press (5 uit » pine To The language you want to set. 4 Frost BONE [ED] 5 Press EXIT (G2) to return to the obsidian screen, or G to scroll 10 a different menu anion. Setting Touch Tone or Pulse Dialing Your phone is set to touch ane dialing, Do not change iF sting Unless touch tone service is not available in your area. Action 1 Press MEND (c=) 2 Boers 16 Tone Boise. 3 Press) or CHANGE (C3) fo switch between Tone and Pulse.
Wer you are not on a call use the volume keys to tangs the day {6 am-8 pm) of night (3 pm-6 am) finger volume. The time of day as set on the phone germinates whether you are adjusting Ihe day of night volume. To 61 the time, see page 26. Making a Call Using the Speakerphone Crass Hands free and dial the number.
Finding a Lost or Misplaced Handset Press PHAGE on the base station. All handsets registered to the base station wil start beeping. Press Off WAIT (G0), or 0K {GED} on a handset to stop paging that handset, or press PAGE on the base. station lo stop paging all handsets.
Sorting the Phone book The private phrasebook can be sorted alphabetically and independently in each handset, Once sorted, a pane book cannot be unsorted of reset Io is previous fst order. Action 1 Crass PHONE BK (0) and serology {O} lo any choreograph entry. 2 Select NATION 3 gorily down, 4 Press SELECT, The handles displays Alphabetical ly sort phone bk 5 Select VES or HO 6 Eras GFF 16 rein 16 the standby screen.
5 To modify the name, press DELETE (G2) ta backspace and erase characters to the ‘oft of the hiking cursor. See page 24 for information an entering text Nate: The first letter of the airy is an uppercase letter. To change the entry from uppercase fo lowercase, press *, A flashing square indicates that you are in the uppercase text entry made. 4 flashing _ indicates that you are in the lowercase ext entry made. § Brit down (3) to mauve bu the hone umber field 7 Mandy the amber 8 Press DONE (E55).
Notes This fungi on is useful when using automated response systems. For example, you souls access your ink account number by dialing the bank's phone amber, entering your Go count number {using automated dialing), and PIN fusing automated dialing). Then, you can enter your most infrequent used prompt, for example, balance ingenuity. Using Caller ID Note: You must subscribe to caller 10 sarcastic from your foal telephone company 10 use the caller ICS features of your phone.
Deleting Carr 10 Calls rE 1 From the caller 10 list, press OPTIONS 7 Scroll to Delete (io delete fie current caller ID entry) or Delete All {io delete alt caller 10 calls) and press SELECT (cm). Note: If deleting all cal. press VES at the Delete ALL pogrom. 3 Prose BEAK (GED to return 10 the caller 1D list synopses ay) Busy 3 s Multi handset Fun Multi handset Functions The following multi handset functions require at least handsets registered to the base station.
Conference Calling One handset is already on a call, the display on other handsets registered ts the same base station shows Line in use. Once & second handset is added to the call, the displays on al handsets shows On conference. A maximum of 2 handsets can be on a conference call at the same time, 1% connect a second handset 1 a call, press ON or Hands free on the second handset.
Handset to Handset Intercom pr 1 Press catercorner @ From the ist of handsets, press ot bail + points 10 the Handset you want 10 page, of to Select R1L to page all handsets, Note: If there are early 2 handsets registered 101he base. pressing the Intercom bunion wil automatically page the other handset 3 Bros PAGE (ca). § To answer the gaps, press OK gz), The first handset to respond is connects.
Using the Handset as a Sleepwalking The walkies-talkie feature lets you tai handset to handset even when the handsets are aut of range farm the base station, When a handset is in walkies: ale mode. you cannot make or receive phone calls You must complete steps 1 and 210s both handsets 10 use walkies-talkie mode. a 1 Press MENU (CG). 7 Scroll Somalis-Talkie and press SELECT (cm), 3 Press intercom on one of fhe handsets.
Preregistering All Handsets Caution: You can registered afl handsets from the base station and render your cordless telephone system inoperable until at least one handset is registrar a the base station (see page 19 for registration information. Caution: Read and perform the lo lowing instructions carefully. Missing or nonperforming a step incorrectly renders your cordless telephone system insuperable. 1 Delete or fasten to all choice mail messages, necessary, ta clear the IN Ginseng Mal indicator.
What Will Motorola Do? Tolstoy, 1 £5 oon, wi al ho chase re, sacs of und re purchase pica of any Francis. Accessories oF Seawater that does not Conform ta this warranty. We may use Regionally equivalent] conditioned reddish-cwnit of naw Products, Accessories or parts. No dat, soft of application asa to your Prof, Accessory or Software, intuiting bul no limited to personal contacts, games and sin tones il be tested To awd ios ach dale, so fare sod applicators please cress 3 bask up ports estrange sere.