Manual

System Setting
42
|
System Setting
Audio Setup
You can configure audio related settings (channel and network transfer) and signal beep for remote control operations.

Audio
Choose whether to receive the live sound source and select an audio channel.
1.
From <SYSTEM SETUP> - <AUDIO>, select
<AUDIO>.
2.
Use the [
▲▼
◀▶
/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.

DEFAULT LIVE AUDIO CHANNEL : select an audio
channel to monitor on the live screen.

NETWORK AUDIO TRANSMISSION : decide if
DVR transfers the audio signal to the remote client.
DVR

PC (Remote Client)

RECEIVE NETWORK AUDIO : decide if DVR
receives the audio signal from the remote client.
PC (Remote Client)

DVR
3.
To apply the change, click <APPLY> in the bottom of the screen.
4.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.

Buzzer
You can set to output the buzzer if you manipulate the remote control.
1.
From <SYSTEM SETUP> - <AUDIO>, select
<BUZZER>.
2.
Use the [
▲▼
◀▶
/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.

REMOTE CONTROLLER : specify the output of
a beep when you press a button on the remote
control.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The confirmation message appears and you will return to the previous
menu.