Manual

System Setting
48
|
System Setting
System Setting
You can configure the settings of date/time, system management, and keyboard controller.

Date/Time
Specify the current date and time.
1.
From <SYSTEM SETUP> - <SYSTEM>, select
<DATE/TIME>.
2.
Use the [
▲▼
◀▶
/ENTER] buttons on the remote
control or use the mouse to change the time or set
the options as necessary.

DATE/TIME : Set the current time and date.
Click< > to adjust the time manually.

DATE FORMAT : specify the date format.

TIME FORMAT : specify the time format.

TIME SERVER : obtain the current time from the
time server. Click <
> to get the current time.

AUTO TIME SYNC : automatically synchronize the
time with the time server at a specific time.

SYNC AT : Set the time to sync with the time
server.

TIMEZONE : specify the GMT standard time for
your local area.

DST : You can set up or release the DST (Daylight
Saving Time).

Both <TIME SERVER> and <TIME SYNC> will be
enabled only if the DVR is connected to the Internet.
3.
To apply the change, click <APPLY> in the bottom of
the screen.
4.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.