Manual

English
|
65
Schedule Setting
1.
Select a start day of the week on the schedule.
2.
Click a time cell from which you want to make the
schedule and drag it to a desired cell.
Or use the [
▲▼
◀▶
] buttons on the remote control to
move to the cell and press [ENTER]. Then, use the
[
▲▼
◀▶
] buttons to move to a desired cell and press
[ENTER] again.
3.
When the time selection is complete, you will be
prompted to spec
ify the use of recording in the
Record Setup window.
4.
To apply the change, click <APPLY> in the bottom of
the screen.
5.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.

Motion Recording
Specify the recording size of the motion event if it occurs and make schedule for that recording.
1.
From the <RECORDING> menu, select <MOTION
RECORDING>.
2.
Use the [
▲▼
◀▶
] buttons on the remote control or use
the mouse to select either <SIZE/FPS/QUALITY> or
<SCHEDULE>.
3.
Set each item of <RESOLUTION>, <FPS>, <QUALITY>
and use of the <AUDIO> for the motion recording.

For more information, see the "Continuous Recording".
(page 64)
4.
To apply the change, click <APPLY> in the bottom of
the
screen.
5.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Record Setting