User Manual

English



TEMPER DETECTION

You can set to detect tampering attempt to interfere monitoring operations by tampering the installed camera.

1.

Select the <TEMPER DETECTION> from the

<CAMERA> menu items in <SYSTEM SETUP>.

2.

Use [

▲▼

◀▶

] buttons on the remote or the mouse

to select <MARK, SENSITIVITY> and set the

tampering detection conditions appropriately.

3.

For each channel, set the day/night sensitivity.

4.

Set the activation of each channel, and set whether

to display indicator on the screen.



SENSITIVITY

LEVEL : The detection sensor

’

s sensitivity for

each detection block. (Can be separately set

for day / night modes)



ACTIVATION : Set the detection for each channel

to be enabled/disabled.



MARK : Turns on or off the detection indicator to

be displayed on the screen.

5.

To apply the change, click <APPLY> in the bottom of the screen.

6.

When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The conﬁrmation

message appears and you will return to the previous menu.

System Setting