User Manual

English
|
69

TAMPER EVENT
You can set how to react upon a detected tampering event.
Set the tampering event detection in <TAMPER DETECTION> for each channel.
1.
From <SYSTEM SETUP> - <EVENT>, select
<TAMPER EVENT>.
2.
Use [
▲▼
◀▶
] buttons on the remote or the mouse to
set the detection action.

LINKED CAMERA : Select the camera to output
the event action upon a tampering detection.

ALARM OUT : Set the alarm out channel for
detected tampering event.

: Sets whether to sound beeper upon a
tampering detection.

: Sets whether to display a video popup
upon a tampering detection.

: Sets whether to send an email notification upon a tampering detection.

: Sets whether to upload event notification onto the FTP upon detected motion event.
3.
To apply the change, click <APPLY> in the bottom of the screen.
4.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
System Setting