Enterprise Management Suite Light Version 02.
Tale of Contents II. INSTALLING ............................................................................... 4 III.EXECUTING EMS ....................................................................... 6 IV. FEATURES ................................................................................ 7 1. EMS Overview ......................................................................................... 7 1. Online/Offline button .............................................................................
8) Main Display..................................................................................................... 24 2. Virtual DVR............................................................................................ 25 1) What is Virtual DVR. ..................................................................................... 25 2) Virtual DVR Monitoring ................................................................................... 25 3) Editing ............................................
I. SYSTEM REQUIREMENT The EMS utilizes much resource from the computer as it draws data from multiple DVRs. The PC must sufficiently and efficiently manage the incoming data stream and real-time alerts from each DVR connected. Therefore, the PC must be equipped with a higher minimum requirement for its components and operating system. The following chart displays the minimum and the recommended system specification to operate the EMS properly.
II. INSTALLING Insert the program CD into the CD-ROM drive of PC and locate the EMSLiteInstaller_x_x_x_xx.exe. The Xs represent version number of the program. Double-Click on the file, which opens the setup dialog. The setup dialog displays the installation options: the EMS, XP Firewall Setup, XP Sound Sample, Start Menu Shortcuts, Desktop Shortcut and DVR TIME SYNC PROGRAM. The Start Menu Shortcuts and Desktop Shortcuts may be unchecked if desired. Click on Next to continue.
Click on Install and the installation will begin. Click on Close to finish the installation.
III.EXECUTING EMS 1. Double click icon and you will see the Login window as below. The default user ID and password is “admin” and “0” Refer to EMS Setup to change the password. To get rid of Screen, press X. Refer to EMS account to add user.
IV. FEATURES 1. EMS Overview 1 2 3 4 5 7 6 1. Online/Offline button Connect/Disconnect all events for each device.
2. Device Manager Device Manager will be executed only in Offline status and after log in by „Admin‟. It is for registration for all devices which will be used in EMS program. ① ① ② ③ ④ ⑤ ⑥ ⑦ Export: Abstract the information of registered devices. A. Password window will pops up. B. Enter the EMS Executing Password. C. Designate a directory for save the file. D. Putting the file name, “*.exp” file will be abstracted. ② Import: import the “*.exp” file and register it.
A. If you choose Type, Model will be activated. B. Select your DVR type then “IP, Port, Etc and Password” will be activated. (Last 3 digit of IP number are set by default if you do “Auto Scan”.) a. Name: Type on DVR title to display on Tree, Health window and DVR Window. b. IP: Enter the IP address or DNS name. c. Port: 7000 d. Etc: Edit if you have need special description. C.
⑤ Apply: Apply the changes. ⑥ Del: Delete the selected device. (Device on the tree and E-map will be deleted.) ⑦ Ok: Close the Device Manager window. 3. Tree - Shows or Hide the Tree window. 4. EMS Log Displays logs of all events while EMS is running. ① Begin: Set the beginning time of Search. ② End: Set the ending time of Search. ③ Name: Search only log by registered device‟s name in the tree window. ④ Channel: Search only log by selected channel.
⑧ Search button: Search for log from the beginning. If it‟s Report type, it searches by 1000 log. And if it‟s thumbnail type, it will search by 100 logs. ⑨ More button: Add log which is searched previously. If it‟s Report type, it searches by 1000 log. And if it‟s thumbnail type, it will search by 100 logs. The maximum search log is 20,000 for Report and 1,000 for Thumbnail type. ⑩ Print button: Print the searched log. ⑪ Export: Log list can be downloaded to any folder of PC in text file format.
7. Main Window - Main Window is distinguished by TAP and it‟s possible for docking/undocking. 1. Live or playback video is displayed up to 64 cameras in the main window. When the actual video is displayed, it will display the channel number and title as well as the field rate. 2. E-Map will be displayed. 3. Health Report will be displayed. 8. E-map - Start the E-map window. It will be discussed on Chapter 7.E-Map. 9. Live - Start the previous Live View. 10.
10.2 Health Report Any DVR name or number, or any of the lit or unlit blocks may be double-clicked to access the DVR log list. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① Number - The order the DVR was entered. ② Name - DVR name, either the host name or something created by the user. ③ HDD - Notifies Hard Drive Disk failure during the operation. Normal Error occurred but it is okay now. Error occurs ④ Rec. - Displays the status of the recording LED from the DVR.
⑤ Schedule - Displays the status of the schedule LED from the DVR Schedule recording. Schedule recording had been stopped but now it is recording. Stop Schedule Recording. ⑥ Backup - Displays the status of the Backup LED from the DVR. Backup now Backup had been stopped but now backup properly. Stop backup. ⑦ FAN - System Fan Lock: Notifies System Fan abnormality. - CPU Fan Lock : MPEG4 Pro Model Only. Normal Error had occurred but now it‟s Normal. Currently error has occurred.
⑨ Event A. ALARM TRIGGER - Notifies the alarm trigger. B. MOTION TRIGGER- Notifies motion detection. C. VIDEO LOSS- Notifies loss of video signals. No alarm signal. Alarm Alarm signal occurred. Alarming now No motion Motion Motion has been detected but now motion now. Motion detected.
2. EMS Setup - Located in Log in Page or located the File--Setup ① ④ ⑤ ⑥ ② ⑦ ⑧ ③ 1. OSD Setup Select On-Screen-Display information such as the Time, DVR name, Camera Number, Camera Name, Frame Rates, Status for each camera. 2. Password – The setting to change the password for initial log-in of the software. a) Old Password: b) New Password: Enter your current password. By the factory default, it is “0” Enter the NEW password. c) Confirm Password: Enter the New password to confirm.
3. Etc 1) Check Watermark - Setting to check for watermark. 2) Keep opened window – When users rerun EMS program, EMS automatically reopen all windows which were opened right before closing it. 3) Sequence Time - Setup interval for sequential display of all windows. 4. Video Standard - Select NTSC or PAL. NTSC is set by default. 5. Video Render - Overlay is used by default. The video overlay utilizes Microsoft DirectX and video card hardware acceleration for the optimal video transmission speed.
3. EMS account - File – EMS account Menu You can customize the way EMS and the display for each user. ① ③ ② ④ ⑤ ⑥ ⑦ ⑧ ⑨ 1. User list - Displays registered User list. Detailed user information will be displayed by Clicking USER. „Admin‟ accounts allow the user to change the limited function. 2. User info – Modify ID and Password for each User. 3. Uses DVR List -. Allow DVRs for each user. Each user will have only selected DVRs on Tree window. 4. Detail Windows -.
5. Add -. You can register maximum 20 users. 6. Del -. Delete the selected User. 7. Apply -. Apply to save setting. 8. OK -. Save and close this window. 9. Cancel -. Do not store User‟s authorities and close window.
V. DVR CONTROL 1. Live Monitoring - Live Mode, individual DVRs and Virtual DVRs can be displayed and sorted in any order. 1. Individual DVR - Double-click on a DVR icon or “Live” button to begin live monitoring. ① ② ③ ④ ⑤ ⑥ ⑧ 1) Sequence - Activate sequential display of all windows one by one.
2) Tab unlock -EMS provides multi monitors so the simultaneously monitoring several Live Screens, E-map, Health Report, etc. Click “Tab unlock” button to sustain Undocking mode. 3) Close - Close: Close window one by one - Close all: Close all windows at a time 4) Display option/Multi-screen Displays From the left: single, 4 channel, 6 channel, 7 channel, 8 channel, 9 channel, 10 channel, 16 channel, 25 channel, 36 channel, 49 channel and 64 channel view modes.
5) PAN / TILT / ZOOM CONTROL - If one or more Pan / Tilt / Zoom cameras are installed on the DVR, they can be individually selected and controlled using the PTZ control box. To control a channel-specific PTZ camera, simply click on the channel where the PTZ camera is connected. - This Icon toggles between Shows or Hide the PTZ menu. Tilt UP Up Left Up Right Pan Right Pan Left Down Right Down Left Zoom In Zoom Out Tilt Down ① Focus Indicator Resulting Action Focus near Focus far.
③Tour Indicator Resulting Action Set tour by clicking. Total address depends on connected Pan/Tilt camera. Move into designated area automatically. Run tour ④Special function key It has various function depends on PTZ camera. ⑤ Auto PTZ Indicator Resulting Action Run auto pan function. Run auto tilt function Run Pattern ⑥ Menu, ESC, SPEED Control - Refer to DVR Manual for more information. ⑦ Pan/Tilt Power. Standby Pan/Tilt or Turn on/off the lights of P/T/Z camera.
8) Main Display (1) On-Screen Indicators There are four types of on screen indicators. OSD Display can be chosen in the EMS Set UP. ② Time ① Camera Title ④Frame Rate Time ③ DVR status ① Camera Title: Displays the following orders: Camera Number- DVR Name or Host Name -Camera title * Tip : Camera title can be updated as described in DVR by clinking “Update camera title ② Time: Displays the Local time of the DVR‟s location.
2. Virtual DVR 1) What is Virtual DVR? Virtual DVR is not an actual DVR, but a combination, or group of several DVRs already listed under the Device. Under one Virtual DVR set, up to 64 DVRs can be added, pulling one camera from each DVR to be displayed. The Virtual DVR behaves in the same way a DVR would, except for the warning notifications. 2) Virtual DVR Monitoring - The basic of monitoring a Virtual DVR is just as the individual DVR.
③ Click-and-drag the DVR to any channel number to display all available cameras under Virtual DVR The camera will be added in numeric order from selected channel to end, depends on connoted number of cameras on DVR. Please note that the number of channels to be displayed may be changed at any time if necessary. ④ Individual cameras can be added onto the Virtual DVR by click-and-dragging individual cameras. 4) Delete Camera - Select any camera for delete during live monitoring.
2. Playback Mode DVRs that have been added onto EMS can be accessed in Playback Mode for Remote Playback or to download the files onto the remote PC. Unlike the live mode, only one DVR can be accessed at a time. 1. Remote Search Remote Playback is provide so that users directly playback the stored video on the internal HDD through EMS. 1) Remote Search Right-Click on DVR and context menu will appear on the screen.
Remote Search shows a graphical representation of the recorded video stored on the DVR. The data are color-coded by category: Alarm (RED)>Motion (Green)> Normal (Yellow) Select desired Date and Time. By Click and drag, it is possible to select longer minutes. Click button to start Playback. Select Channel Playback control Buttons Hour, Minute and Clip The Hour, Minute and the Clip can be clicked at any time to move backward or forward in time.
2) Remote Download Remote Download is providing so that users save on remotely connected computer through EMS. By default, the files are saved in “C:\program Files\EMS\Download” - The file selection process is just same as remote playback. Additionally, the user can check any channel that they wish to download. To download the file, click [Download] instead of [Play] The download Tap will appear displaying the Start time, End time and current downloading section.
3) Remote Download for Computer User Account on Vista By default, the files are saved in “C:\Users\ log in USER\Documents\EMS\Download” -Refer to EMS set up to change directory. The download window will be pop up as below and shows [start time, current time, finish time] Maximum Download is for 5 windows. 2. Local Search Local Search is mainly used to review the data downloaded from a DVR or backup CD through EMS. Located on Tools , and then select the DVR file which the file was downloaded from.
3. DVR Menu Setup - The DVR Setup allows modification of all system setting through EMS as it would be done accessing the DVR menu screen. -DVR set up can be accessed through the context menu from any DVRs 4. Context Menu 5 - The context menu allows access to the submenus for the channel, DVR and the Virtual DVR. The submenus allow access to various features for each individual submenu type. 1. Virtual DVR Context menu 1) Live - Start live monitoring for pre-configured Virtual DVR.
2. DVR Context menu 1) Live - Start live monitoring for the selected DVR. 2) Remote Search - Enters Remote Search window. 3) Local Search - Enters Local Search window. 4) Property - Displays general information of the DVR. 5) Log - Displays logs of all events from the DVR from the first power on. User can click on DATE/TIME or MESSAGE to sort the list accordingly. 6) Setup - Enters the setup dialog for the DVR. 7) P.O.S data Search - Enters P.O.S Data Search window.
10) Remove - Remove the DVR from the DVR Window. 11) Rename - Enter individual DVR title to display on EMS Tree. E-Map is not affected. 12) Group Move 3. Camera Context menu 1) Live - Start live monitoring for the selected camera. 2) Post Event Action - Enters the Post Event Action dialog. 3) Control - Control of GoTo, Tour, Auto Pan/Tilt of PTZ menu 4) Rename 4. Digital Input/output Context menu - Digital input is sensor in and digital output is alarm out.
VI. POST-EVENT ACTION EMS allows customization of Alert notification. It includes audio alert, image pop up after events related with DVR, Cameras and Senor. 1. DVR Post-Event Action Right-Click on DVR and context menu will appear on the screen Post-Event windows pops up as below .
1) Event - The EMS will send notifications related to the system abnormalities such as [Connect, Disconnect, HDD fail, Fan Fail, Temperature Fail] 2) Device - Select from registered DVR or system. System means PC which EMS is installed. 3) Sub Type - Select the Device which is connected with above no 2.
6) Parameter ① DVR>Camera >Parameter - Type the desired number for the camera PTZ options such as preset no. ② System> Sound - Select wav file for alert. 7) After - Set the delay time after the event. (Unit 1ms: 1000 = 1second) 8) Add - One Action will be added on event. (You can enter 25 at maximum.) 9) Del - Delete the selected action. 10) Test - Test action for events. 11) Apply - Apply changed value. 12) OK - Save the applied value and exit the window.
2. Camera Post-Event Action - Right-Click on Camera and context menu will appear on the screen 1) Event - The EMS will send notifications related to the camera such as [Motion, Alarm, Video Loss, Motion detect]. Only model supports Motion detect function. 2) Device - Select from registered DVR or system. System means PC which EMS is installed. 3) Sub Type - Select the Device which is connected with above no 2.
④ System>Window - Select . Message windows come up for 10 sec and down. It is linked to Live image. 3.
VII. E-MAP 1. Edit 1. Right-Click on next Group and context menu will appear on the screen. Or Click on the Tool bar 2. E -map control Buttons will be displayed. ① Zoom In: Enlarge the image twice which is registered on the EMAP and also change the coordinates of items. The maximum magnification rate is 400%. ② Zoom Out: Shrink the image twice down which is registered on the EMAP and change the coordinates of items. The maximum reduction rate is 25%. ③ Remove: Remove the selected E-map.
3. Select Background. - Select image file for the Map You can store the image file at [C:\Program Files\EMS\EMAP\BACKGROUND]. 4. Drag and drop your desired items onto e-map.
5. When you click by Right Mouse on the tree and drop to e-map. You can select the image of the icons. ① ② 1) DVRs - MPEG 4 Pro DVR / MPEG 4 Basic DVR / MJEPG DVR - Lock: Select this to keep the position of all icons as arranged in map. - Event MPEG 4 Pro DVR / Event MPEG 4 Basic DVR / Event MJEPG DVR * Event DVR displays the Event status of DVR by blinking Red Color. Setup the motion, Alarm, Video Loss at E-map setup.
2) Camera - Select the camera image distinguished as CCD Camera, Dome, IP Cam, PTZ camera. - Select to display of the status of motion record. - Select to move directly the settled position. - Select < Live Video> to live monitoring. 2. E-Map Link All items and e-maps are linked together. If you wish to make a link between e-maps, drag and drop. - When you click the e-map it will automatically move to linked e-map.
Revised at Jan.
