Software Manual Owner's manual

Enterprise Management Suite

2. EMS Setup

- Located in Log in Page or located the File--Setup

1. OSD Setup

Select On-Screen-Display information such as the Time, DVR name, Camera Number,

Camera Name, Frame Rates, Status for each camera.

2. Password

– The setting to change the password for initial log-in of the software.

a) Old Password: Enter your current password. By the factory default, it is “0”

b) New Password: Enter the NEW password.

c) Confirm Password: Enter the New password to confirm.

<Note> This password is for protection screen when you launched EMS. This is different

from your DVR password.

①

②

③

④

⑤

⑥

⑦

⑧