VM-Q401A CCTV Color Quad Processor User’s Manual www.cctvcamerapros.
System Features - Connects up to 4/8 Video Camera Adjustable Brightness, Contrast, Saturation, Hue and Sharpness - High Resolution 720X480 60Hz for NTSC 720X576 50Hz for PAL - Various Display Modes QUAD Split Mode Full Screen Mode PIP Screen Mode Non-realtime 8 Split Mode Dual Split Mode Auto Sequence Mode - High Performance Freeze Function Flicker Free Image Capture - High Performance Zoom Function Selectable Zoom Area - Various Overlay Information Camera Title Real Time and Date Alarm/Loss/Motion Message
Rear Panel Installation Color Quad system with Audio AUDIO IN CAM1 CAM2 CAM3 VCR IN VCR OUT OUT MONITOR OUT DC 12V/1A 1 3 L 2 4 R Camera Connection Accept 8 composite video inputs from the camera. Monitor Connection Provide 1 composite video output for the main monitor. VCR OUT Connection Provide 1 composite video output for recording in the VCR. VCR IN Connection Accept 1 composite video input for playback from the VCR. AUDIO IN Connection Accept 4 composite audio inputs from the camera.
Front Key Operation Color Quad system front panel MENU AUTO ZOOM VCR Color QUAD System POWER ESC FREEZE PIP ENTER MENU / ESC / A/B Invoke menu setup / exit / change page A or B AUTO / FREEZE Invoke auto sequence function / freeze function ZOOM / PIP / MODE Invoke 2*ZOOM function / picture in picture / change display mode VCR / ENTER VCR playback / enter menu setup / ▲ Channel１（channel５）display／up / ▼ Channel２（channel６）display／down / ◄ Channel３（channel７）display／left / ► Channel４（channel８）display／ri
Func2 Func1 Func2 Func1 Short Key Press it in less than 1 second Long Key Press it in more than 1 seconds Setup Menu Function / Quad A or B Display Refer to the Setup Menu Operation section. Key A/B selects page to be displayed. Page A and B is toggled for each A/B key. MENU A/B MENU A/B Setup Quad Zoom Function A zoomed area can be moved by pressing 4 arrow keys when zoom function is invoked. Freeze function can also be invoked while zoom function is invoked.
When playback function is running, 4 channel keys select camera to be displayed as single full screen and the MODE key makes quad display mode. VCR ENTER Playback Single ZOOM MODE VCR ENTER Quad Exit Audio Display (Only with Audio color Quad system) The display modes are circulated as the following sequence.
VCR ENTER Freeze VCR ENTER Select Channel Select Camera Exit Auto Sequence Display AUTO key invokes auto sequence display mode and this mode can be maintained until any other display mode is selected. AUTO FREEZE Auto Sequence Single Channel Display Each channel button selects camera to be display as full screen. When pushing same button, camera is toggled to the other page.
Setup Menu Operation The system provides a built-in GUI setup screen. For each menu, the key function is described in the lower region to help operation. The following figure shows the structure of GUI menu.
Setup Main menu SETUP M AIN MENU SYSTEM SETUP CAMERA SETUP DISPLAY SETUP AUTO SEQUENC E MOTION SETUP SELECT EVENT SETUP E NTER EVENT REPORT M ENU EXIT System Setup Menu SYSTEM SETUP DATE : YYYY-MM-DD 2004:01:01 TIME : HH-MM-SS 12-00-00 SYSTEM FORMAT : PAL SYSTEM ID NUMBER : 01 KEY LOCK : OFF FACTORY RESET : SELECT ADJUST NO ENTER 8 / 17 MENU EXIT
Factory Reset Menu FACTORY RESET WARNING! THIS SYSTEM GETS TO LOSE THE CURRENT SETTING VALUE AND WILL BE INITIALIZED WITH FACTORY RESET MODE.
Camera Setup Menu CAMERA SETUP CAMERA : 1 TITLE : CAMERA1 SELECT BRIGHTNESS CONTRAST SATURATION HUE SHARPNESS : : : : : MIRRORING : OFF ADJUST 0 0 0 0 0 MENU EXIT Auto Sequence Setup Menu AUTO SEQUENCE DWELL TIME SELECT PAGE A QUAD CAMERA1 CAMERA2 CAMERA3 CAMERA4 : : : : : 1 1 1 1 1 SEC SEC SEC SEC SEC PAGE B QUAD CAMERA5 CAMERA6 CAMERA7 CAMERA8 : : : : : 1 1 1 1 1 SEC SEC SEC SEC SEC ADJUST MENU EXIT 10 / 17
Motion Setup Menu MOTION SETUP CAMERA : 1 DETECTION TIME ALWAYS OFF ON : 11:00:00 OFF : 12:00:00 SENSITIVITY : VELOCITY : 0 0 MASKING AREA [X,Y] = ( 0, 0 ) SELECT ADJUST MENU EXIT Event Setup Menu EVENT SETUP BUZZER/REPORT ☑CONTROL CHANNEL 1 2 3 4 5 6 7 8 ALARM √ √ √ √ √ √ √ √ LOSS √ √ √ √ √ √ √ √ MOTION BUZZER HOLD TIME : REPORT HOLD TIME : SELECT 05 SEC 30 SEC ENTER ENABLE 11 / 17 MENU EXIT
Event Report EVENT REPORT 1 OF 6 PAGE NO YY-MM-DD HH:MM:SS CH EVENT 1 04-07-30 16:56:03 1 LOSS 2 04-07-30 16:56:03 2 ALARM 3 4 5 6 7 04-07-30 04-07-30 04-07-30 04-07-30 04-07-30 16:56:03 16:56:03 16:56:03 16:56:03 16:56:03 3 4 5 6 7 MOTION LOSS ALARM MOTION LOSS 8 9 10 04-07-30 04-07-30 04-07-30 16:56:03 16:56:03 16:56:03 8 1 2 MOTION LOSS ALARM LIST CLEAR : NO SELECT SELECT PAGE MENU EXIT Event List Clear Menu LIS T C LE AR WAR NI NG! THI S S YS TEM G ETS T O L OS E THE CU RR
FREEZE 1 POWER VCR MENU QUAD/ENTER AUTO CAM3/+ CAM4/ZOOM 4 3 2 CAM1/▲ CAM2/▼
