Quick Guide

2
IP
Network
3 (Optional) Install SD Card
Some camera models support Micro SD card. You need to open the bottom cover to
install the SD card. Do not hot plug the Micro SD card after it is inserted. Otherwise
the camera or the SD card might be damaged.
1. Open the bottom cover.
2. Insert the SD card properly.
Micro SD slot
4 Connect the Kit
The following part shows an example. The actual device may vary.
1. Connect the NVR to a monitor with a VGA or HDMI cable (not included in the kit).
2. Plug a mouse into the USB interface on the NVR.
3. Connect the NVR and the camera to power.
Figure 4-1 NVR Interfaces
Monitor
Monitor
Antenna
interface
HDMI
VGA
Antenna
interface
Mouse
E.g.,loudspeaker
GND Network
USB
interface
Audio
output
Power
supply