User`s manual

DVR User’s Manual

3.2 Power Up / Shutdown the DVR

If the DVR must be shutdown for any reason, please use the proper shut

down and power up procedures to avoid damaging the DVR.

To Power Up the Unit

Simply plug in the power adapter that came with the package and the DVR

will start to boot.

The color bar and system checking information will be shown on the monitor

and then disappear when the unit has been completely powered up.

To Restart / Shutdown the Unit

Press MENU and input the administrator password to access the OSD setup

menu. Select <Shutdown> in Main Menu and press ENTER to enter the

Shutdown menu, which displays as follows.

Shutdown

1. Power Off

2. Reboot

Execute

Select this item to shut down the unit. Do not remove the power during shut

down until the message “You can safely turn off DVR now!” displays.

Select this item to reboot the unit. The color bar and system checking

information are displayed on the monitor until the unit is completely restarted.