User`s manual

Digital Video Recorder User’s Manual Ver 9.x

2.1 LOGIN DVR SYSTEM

To access the features of the CCTV Services Inc. DVR, each user must log in with a valid user name

and password. User names and passwords are case sensitive.

There are two user access levels that can be configured on the DVR. Access levels range from the

Administrator, with the most rights and privileges, to the restricted user, with the least rights and

privileges. For information about configuring access levels, refer to the User authority level section of

the DVR user’s manual.

For security reasons, you are prompted but not required to change the Admin password immediately

after logging in for the first time.

To log in with the Administrators account, do the following:

1. When clicking on the

LOCK button in the DVR Main screen,

Authentication Login prompt dialog will be appearing on the screen. (Shown below)

The built in Administrator user ID: admin, Password: 1111.

(Use the keyboard or virtual computer keyboard,

Clicking on the keyboard button to using virtual keyboard)

2. Enter admin in the User ID field and 1111 in the Password field.

3. Click on the OK button to log in.

[NOTICE]

Added default Administrator user ID and PASSWORD of our DVR is 195 or 393 for both.



2.2. ENABLE WINDOWS FUNCTION KEYS

Enabling the Ctrl, Alt and Windows key allows you to open the Windows Task Manager Dialog box to

perform Windows system administration tasks. To complete the procedure, you must be logged on to

the DVR as an administrator on a DVR SYSTEM.

FUNCTION key is locked, Ctrl, Alt, and Windows key not work.

To enable the Ctrl, Alt and Windows key:

1. When clicking on the ALT and F2 key simultaneously on the Keyboard,

‘Close WinLock’ message dialog will be appearing. (Shown left)

Enable Ctrl, Alt, DEL and Windows key on the Keyboard.

3. Click on the OK button to close this message.

Virtual K/B