User`s manual

Digital Video Recorder User’s Manual Ver 9.x
Copyright © CCTV Services Inc. All rights reserved. 16
ON SCREEN DISPLAY(OSD) INFORMATION
Instruction
The OSD consists of camera Number, Description, Recording status, PTZ and Audio
that is superimposed on each pane.
● CAMERA NO : Shows camera number in that channel
● Recording Status: [R] Recording, [C] Continuous Recording, [M]Motion Recording,
[S] Sensor Recording, [C&E]Continuous & Event Recording, [S&M] Sensor & Motion
Recording
● Camera Name (Description) : Shows the Name of each channel
● PTZ: When PTZ camera is connected and setup, [P] is shown.
● Audio: When Audio is connected, [A] is shown.
 Red Border Line : When Event is setup in each channel, it shows Red Border
Line in that channel.
DATE/TIME INDICATOR
Date/Time/
Network
Connection
Information
This shows the Data/Time information
[Network Connection Icon]
It show currently connected Client Status.
Client connection status will be appearing
after click on the CONNECTION INDICATOR
(display it brightly) on the right area in
time/date indicator.
Display it Brightly when live audio running,
PTZ CONTROL PANEL
USING PTZ
Description
Users can operate PTZ cameras when entering this button.
TIPS OF PTZ CONTROL
Description
Allows users with access rights to operate camera lens control features and to program
PTZ presets, and tours.
Users have to setup the PTZ on the DEVICE of SETUP dialog before using PTZ.
 According to PTZ control in DVR system, Do not setup the “ID=0” on to PTZ
camera, DVR system not working at “ID=0” due to DVR system “ID=0” not available
in PTZ Setting.(Camera 1 = PTZ ID 1)
Setup
A tick inside the box indicates PT SET on the Camera Tab in SETUP.
(Refer to PT setting in Camera Tab)
Open Panel
Click on the PTZ button.
PTZ PANEL BUTTON DESCRIPTION
1. Select channel No,
j
ust clickin
g
on left/ri
g
ht(◄ ►) button.
2. Control using below buttons.