User`s manual

Digital Video Recorder User’s Manual Ver 9.x

PTZ Panel

[Control Buttons]

• POWER : Camera Power On/Off.

• LAMP : Camera Light On/Off.

• AUX : Auxiliary Power On/Off.

• PTZ Direction Control Panel.

• Auto-Pan : Auto PAN On/Off

• PTZ Camera Selection.

• Iris +/- Button.

• Focus in/out Button.

• Zoom in/out Button

• Speed up/down Button

• PRESET Button.

• PRESET Setup Button

• TOUR button

• TOUR SETUP button

• Scan Group Button

• Scan Group Setup Button

PTZ PRESET

Description A preset is a user-defined camera position using PTZ and focus commands the

(camera’s auto focus option must be turned off). Only cameras that support

positioning and programming using Pelco D, P, or supported third-party protocols can

use this feature. ( Refer to Appendix)

Programing

PTZ

Preset

PROGRAMING A PRESET, do the following:

1. Click on the PTZ button after chosen CAMERA CHANNEL.

2. Click on the

button in the PRESET field on PTZ Panel. Preset dialog appearing,

click on the ADD button

3. Move the camera to wanted place

4. Preset ADD dialog appearing.(Shown above) fill in Preset No and Description.

5. Click on the ADD button to activate preset and Exit button, Activated Preset NO will

be listed on the Preset list field in Preset dialog.

When you program the same Preset No, the last No is saved.

6. Users can add presets making same progress. (3~5).