User`s manual

Digital Video Recorder User’s Manual Ver 9.x
Copyright © CCTV Services Inc. All rights reserved. 18
7. Have to save programmed Preset, just click on the SAVE button.
8. Click Exit button to exit programming mode in the Preset dialog.
START PRESET
1. Choose the activated Preset position in the Preset list field.
Click on the
PRESET RUN button to testing Preset position, will be Move the
camera according to activated preset position.
PRESET TOUR
Description A preset tour allows a camera to move through a programmed sequence of PTZ
presets.
The DVR-2000 or DVR-3000 Series DVR can store up to four preset tours.
At least one PTZ preset must be set in order to create a preset tour.
Programing
Preset and
Tour
PROGRAMING PRESET TOUR
SETUP the several PRESET position first, and then Click on the
SETTINIG button
on the Touring area in PTZ Panel.
The “Tour” dialog box opens. (Shown next page)
To Programming Preset Tour, do the following:
a. Tour ADD dialog appearing after click on the ADD button to add presets to a
tour on the Tour dialog. (Shown left)
b. Fill in TOUR NO and DESCRIPTION.
c. Select and Add Preset in list by clicking on the
button and then define
the Duration Time of touring.
Chosen preset will be move on to Tour Member field.
Touring programming need several Touring just making the same progress.
 When set this as 2, the preset Dwelling time is set as 5 seconds.
If need check camera position, just double clicking, it starts testing of touring.
d. Click on the ADD button to activate preset tour and Exit button to return to
the Tour dialog.
e. Activated Preset tour will be listed on the Tour list field in Tour dialog.
f. Have to save programmed Preset, just click on the SAVE button.
g. Click on the Exit to close programming tour.