User`s manual

© Copyright Qvis ®. All documentation rights reserved.
37
Embedded DVR Setting
Open 【Main Menu】→【Management】→【Network】→【Advanced】→【DDNS】
→【Enable】
Name
Configuration
DDNS
NO-IP DDNS
IP
dynupdate.no-
ip.com
Port
80
Domain name
xxx.xxx.org
Username
xxx
Password
xxxxxx
4.1.3 Dyndns DDNS（www.dyndns.com）
Register
To login at the Dyndns website, you need to register an account.
Click on the confirmation link, login the account, click 【Add Host Services】 at [My
Services], set your own realm name, and then operate according to the procedure.
Configure the Embedded DVR
Open 【Main Menu】→【Management】→【Network】→【Advanced】→【DDNS】
→【Enable】
Name
Configuration
DDNS
Dyndns DDNS
IP
Members.dyndns.org
Port
80
Domain name
xxx.xxx.com
Username
xxx
Password
xxxxxx
4.1.4 Test and verify DDNS
After setting up the embedded DVR, please wait for a few minutes and the analysis
records will be updated. Click ‘Operation’ in the Menu of computer, input “cmd”, click
“OK” to open a window. See ‘cmd’ prompt image on the next page.