Product Specs

COR
FCC Information/ Operational Description
FCC ID: 2APBE-720001 OPx-C60
PA73P005_en
Edition: 01
Page 15 - 28
Product specific instructions
© CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement.
3
Connector
U.S. PLUG 8P8C, Molded Pantone
Yellow 107, Gold Plated 3U
1
b) Wire List
P1
Color
PIN OUT DETAILS
P2
1
White
V_IN-OUT
1
2
Black
GND
2
3
Red
<= RS232
3
4
Green
=> RS232
4
7
Blue
Wake UP
7
8
Blue
GND_IN-OUT
8
Note: All cables have to pass electrical test.
5.10.2 IP information of COR versions
The COR provides the following IP protection classes.
- COR-A10, -A12, -A20
o front panel IP65
o back panel IP20
- COR-B20
o back panel IP20
o front panel IP32
 3 = foreign object size > 2.5mm diameter cannot entry
 2 = water drops with 15° angle have no effects of damage
Further information on IP level of COR-B20
Water can entry to the backside of the COR reader (inside the vending machine) over the
card slot. The contacting unit of the COR is opened at the bottom side to let foreign objects
fall out or to let invaded water flow out (this is needed to prevent a blockade of the contacting
unit).
There should be mounted a drain sheet inside the vending machine under the COR-B20 to
shield the electronics under the COR-B20.
The openings at the backside of the COR housing for connector plugs or flexible connectors
are mounted above the contacting unit. So there is no possibility for water drops to entry in
this area to the COR electronics over the card slot.
Only spray water or hose water could entry over some corners. Depending on the location
where the COR is used we recommend to provide a protection board to prevent the device
from soiling or spray water.