Product Specs

COR
FCC Information/ Operational Description
FCC ID: 2APBE-720001 OPx-C60
PA73P005_en
Edition: 01
Page 17 - 28
Product specific instructions
© CCV Deutschland GmbH - It is not allowed to duplicate or distribute this document without our agreement.
Information for the contacting unit of the COR-B20
- The contacting unit for the chip card is produced for 10 years in a large quantity. It is
sophisticated very solid and is also used for outdoor applications.
- All materials of the contacting unit are water resistant (i.e. synthetics, high-grade
steel, gold-plated contacts for contacting the chip and gold-plated contacts at the limit
switch).
- There can only be problems with frozen contacts. If the card is put in more times the
ice on the contacts will detach. For preventing the contacts of freezing we
recommend to use a heating inside of the vending machine.
5.10.3 Viewing angle of the COR display (COR-A20, COR-B20)
Respecting the tolerances of the hardware components and the mounting tolerances the
following max. viewing angle for the COR can be given.
- max. viewing angle from top / bottom about 17° to the display normal
- max. viewing angle from left / right about 50° to the display normal
5.10.4 COR Interfaces
a) RS-232 Host Interface
High speed RS232 (default 115.2 kbps, switchable to 230.4, 460.8 or 921.6 kbps);
RJ45; 8 pin shielded) without hardware handshake.
The RJ45 Connector is located at the bottom side of the COR and the maximum
cable length is 100cm.
Pin
Signal
1
Vin (power supply)
2
GND
3
TxD (output)
4
RxD (input)
5
Not connected
6
Not connected
7
nWAKE (input/output)
8
Power GND
b) USB host interface
 USB 2.0 compatible, 12 MBps, USB function (slave)
 connector type: 5-pin Mini-B-Connector
 Power supply via RJ45 connector (VBUS not used for supply)