Specifications

32
Fig. 4.3b
Fig. 4.3a
BOTTOM MAIN OVENTOP OVEN
MODELS WITH WIRE RACKS
• Assemble the wire racks to the oven walls using the 2 screws (Fig. 4.2a - 4.2b).
In the models with catalytic panels interpose the catalytic panels “A” with the arrow
up (fig. 4.2a - 4.2b).
Models with side lamp on the bottom cavity: The catalytic panel with the hole for
the side oven lamp must be positioned on the left oven wall. DO NOT INTERPOSE
THE CATALYTIC PANEL WITHOUT THE HOLE ON THE LEFT OVEN WALL.
• Slide in, on the guides, the shelf and the tray (fig. 4.3a - 4.3b).
The shelf must be fitted so that the safety catch, which stops it sliding out, faces
the inside of the oven.
• To dismantle, operate in reverse order.
Fig. 4.2a
A
Fig. 4.2b
A
HOLE FOR SIDE
LIGHT (SOME
MODELS ONLY)