Specifications

37
MODELS WITH TILTING GRILL AND SLIDING SHELVES
• TOP OVEN: See chapters “MODELS WITH SLIDING SHELVES” at page 36 and
“MODELS WITH TILTING GRILL ON THE TOP OVEN at page 38.
• BOTTOM OVEN: Operate as follows:
– Assemble the sliding shelves on the oven walls using the 2 screws (fig. 4.14).
In the models with catalytic panels interpose the catalytic panels “A” with the arrow
up (fig. 4.14).
Models with side lamp on the bottom cavity: The catalytic panel with the hole for
the side oven lamp must be positioned on the left oven wall. DO NOT INTERPOSE
THE CATALYTIC PANEL WITHOUT THE HOLE ON THE LEFT OVEN WALL.
– Position the shelf and tray on the sliding shelves (fig. 4.15).
To dismantle, operate as follows:
– Unscrewing the fixing screws and slide off the sliding shelves and the catalytic liners
(if supplied) to the oven wall as in fig. 4.14.
The grill is secured to the rear wall of the oven on a hinge system that allows
it to be lowered to allow proper access when cleaning the oven ceiling (fig. 4.16).
Fig. 4.14
Fig. 4.15
Fig. 4.16
BOTTOMMAINOVEN ONLY
A
A
HOLE FOR SIDE LIGHT
(SOME MODELS ONLY)
SIDE LIGHT
(SOME MODELS ONLY)