Specifications
43
D
G
Fig. 4.30
Fig. 4.27
Fig. 4.26
E
F
Fig. 4.29
H
Fig. 4.28
REASSEMBLING THE INNER PANE
To reassemble the inner pane of the
oven doors operate as follows:
– Make sure the door is locked open
(see Fig. 4.23).
– Check the correct positioning of the
no. 4 (four) silicon rubbers D (fig. 4.26).
– Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
– Insert the inner pane in the left E and
right F side guides (fig. 4.27) and gen-
tly let it slide up to the retainers H (fig.
4.28).
– Top oven door only: Reassemble the
seal G in the correct way (fig. 4.29) by
hooking the no. 3 fixing hooks in the
proper holes (fig. 4.30).
– Open completely the oven door and
close the lever A on the left and right
hinges (fig. 4.31).
A
Fig. 4.31
It is normal the opened gap between the
top edge of the inner pane and the sealed
gasket. This allows the cooling air
circulation.
The bottom
oven door has
not a sealed
gasket in the
top part.
The top oven
door has a
sealed gasket
in the top part.