Product specifications

SMS and e-mail Messaging
3BDS011222-510 B 161
GSM Hardware
GSM hardware (GSM modem or a telephone with a built-in GSM modem)
supporting the AT+C command set (GSM 07.05 and GSM 07.07) are compatible
with the SMS/GSM Device.
A list of GSM service providers is shown in Appendix C, SMS and E-Mail
Messaging, GSM Service Providers on page 586, Table 37.
1. Connect the GSM hardware to an available COM port and turn on the power.
2. Open Aspect System Structure.
Configuration of each individual personal GSM telephone number occurs while
setting up the Message Subscriber, refer to Message Subscriber on page 187.
The list of GSM service providers shown in the table can be made available in a
pick list used later in this procedure by using Windows Explorer to navigate to:
...\Program Files\Common Files\ABB Industrial IT\800xA\3rd Party
Software and launch SrvSetup.exe.
Double-click Services.inf, select the preferred carrier, and click OK, refer to the
figure below.
The SMS Device Configuration must be performed by a user with administrative
privileges on the operating system. SMS Device Configuration is not supported
for a logged-over user.
The GSM hardware is set up using the Aspect System Structure. This procedure
requires that the Messenger Server be disabled before configuring the SMS
device (refer to Enabling/Disabling SMS and e-mail Messaging on page 199).