Product specifications

SMS and e-mail Messaging
180 3BDS011222-510 B
4. If an access number is required to access an outside line, insert it between the T
and the
1 in the PhoneNumber line of the code. For example, a 9 might be
required to access an outside line. Commas can be used after the access number
if a pause is required to access the outside line. The comma usually creates a
pause of one second; however it can vary by modem. Refer to the modem
hardware documentation for the exact duration. It may also be necessary to
change the
T. Refer to the modem hardware documentation for the appropriate
code.
5. Enter a valid PIN for the pager used in the test in the PIN line of the code.
6. Click GO.
7. Verify that the message in the Reply field indicates that the message was sent
and that the pager receives the message
Test Msg 1.
E-mail Test Utility
This utility requires:
• Valid sender e-mail address.
• Valid receiver e-mail address.
• If necessary, the domain name or IP address of an SMTP server with
permissions to relay outgoing e-mail messages, from other internal SMTP
servers, directly to the internet. The SMTP server is needed if it is necessary to
bypass the local SMTP service pickup directory if, for example, a firewall
blocks direct SMTP traffic through port 25.
1. Use Windows Explorer to navigate to:
...\Program Files\ABB Industrial IT\Operate IT\Messenger\Bin
2. Double-click on TestEmailObj.exe. The Test E-mail dialog box shown in
Figure 94 appears. The example in the figure has fields filled in for clarity.