Product specifications

SMS and e-mail Messaging
3BDS011222-510 B 183
To change the factory default Central Paging Terminal telephone number:
1. Use the Structure Selector to open the Aspect System Structure.
2. Use the Object Browser to navigate to:
Aspect System Structure, Aspect Category > Messenger, Aspect
System > Modem Device, Aspect Type > Modem Device, Aspect
Category
3. Right-click
Modem Device, Aspect Category and select Modem Device
from the context menu that appears. This opens the Modem Device shown in
Figure 95.
Table 9. Paging Service Providers
Paging Service Provider
1
Central Paging Terminal
Telephone Number
Arch Wireless™ 18002506325
Cingular
®
18004774550
SkyTel 18006792778
Verizon 18668230501
NOTE:
1. The paging service providers listed in this table are only
those tested and verified by ABB as of the original
publication of this instruction. The exclusion of paging
service provider information is not intended to imply that the
paging service provider is not compatible with SMS and
e-mail Messaging. ABB recommends all paging service
providers, whether or not they appear in this table, be tested
and verified before using SMS and e-mail Messaging.
The factory default is set to the telephone number shown in the table for the
SkyTel Central Paging Terminal. It is set for tone dialing and without the need for
a digit to access an outside line. If the default is acceptable, there is no need to
perform the following procedure.