Product specifications

SMS and e-mail Messaging
192 3BDS011222-510 B
21. Click Apply and then close the TAP/Modem Device.
22. The list in the Message Subscriber shows the configured devices. The top
device has the highest priority, followed by the rest in top-down order. To
change the order in the list, and thus the priority order, select the device and
click Move Up or Move Down.
23. To delete a configured device from the list, select the device and click Delete.
Figure 102. TAP/Modem Device
The PIN is the 10-digit personal pager and/or mobile telephone number for the
current user.
Although the list in the Message Subscriber has priority assigned to it, The device
used is dependent on the configuration of the Message Handler (refer to Message
Handler on page 205). If this user is a member of a user group that messages are
being sent to (selected during Message Handler configuration), messages are
only sent to the highest priority device in the list for each user in the user group.
If the messages are being sent to this user, the user device selected in the Message
Handler configuration is used. In order to send the same message to multiple
devices for the same user, multiple Alarm and Event Message Sources and
Message Handlers pointing to the same Alarm and Event List must be set up and
configured.