Product specifications

System Status
3BDS011222-510 B 213
5. Uncheck the Make new alarms entry each time a condition gets active
check box.
6. Click Apply to save the entered data.
Alarm Storage
The number of alarms in main storage is 10,000. This means the Alarm manager
server can keep 10,000 conditions (alarms) in memory.
The default value is 10, 000 and the System Engineer has permission to modify it.
This number is for the total number of alarms for all categories. Each category value
can be modified. The default value for each category is the total alarm storage
divided by the number of categories. For example, if there are ten categories and
alarm storage is 10,000, there are 1,000 condition for each category.
System Status
Topology Status Viewer
To configure a Topology Diagram to view status for the whole plant you perform the
following principal steps. They correspond to workflow steps Create Process
Functions, Build Lower Level Control Structure and also to Download and Test
Application Software:
1. On every Controller object: Open the Topology aspect, open Diagram view and
add a new Diagram based on the skeleton for the Controller level (AC 800M
Single / AC 800M Redundant). Processor Modules and the Hardware Units
below by default have Topology aspects with pre-configured Component
views. The symbols of these Topology components are placed by default on the
diagram. Save the diagram.
2. Insert / create objects representing clients, servers and eventually other network
components in the Control Structure above the Control Network level.
If this check box is selected, each change from the inactive to active state will
result in a new alarm.
The conditions that have be saved in Alarm Manager process are
Enable/Active/UnAcknowledge, Enable/UnActive/Unacknowledge or
Enable/Active/Acknowledge.