Product specifications

Device Management PROFIBUS & HART
238 3BDS011222-510 B
PROFIBUS and HART Fieldbus Preparation in Control Builder M.
Before device types in the form of hardware units can be used, the corresponding
hardware libraries have to be inserted in the Control Builder M project. The inserted
hardware libraries have to be connected to a specific controller afterwards.
Hardware libraries represents the physical device type in the 800xA system. During
installation of Control Builder M the following libraries are installed necessary for
PROFIBUS and HART device engineering:
• S800IoModulebusHwLib
This library contains the S800 I/O-modules, which can be used at AC 800M
ModuleBus only. This library is mandatory to configure HART device types on
AC 800M ModuleBus.
• S800CI801CI854HwLib
This library contains S800 I/O modules and the CI801 PROFIBUS gateway. It
can be used with the PROFIBUS DP master CI854(A) only. This library is
mandatory to configure HART Device Type Objects at S800 PROFIBUS
Remote I/O.
• S800CI840CI854HwLib
This library contains S800 I/O modules and the CI840 PROFIBUS gateway. It
can be used with the PROFIBUS DP master CI854(A) only. This library is
mandatory to configure HART Device Type Objects at S800 PROFIBUS
Remote I/O.
• S900IoCI854HwLib
This library contains S900 I/O modules and the S900 PROFIBUS gateway. It
can be used with the PROFIBUS DP master CI854(A) only. This library is
mandatory to configure HART Device Type Objects at S900 PROFIBUS
Remote I/O.
• CI854PROIBUSHwLib
This library contains the PROFIBUS-DPV1 master, which can be used at
AC 800M CEX bus. This library is mandatory to configure PROFIBUS device
types on PROFIBUS networks.
Insert of hardware Libraries, connect them to a specific controller, open and
release projects and create new instance based on hardware libraries is described
in this document in Insert Hardware Libraries on page 35 and the following.