Product specifications

Device Management PROFIBUS & HART
250 3BDS011222-510 B
8. Click Create.
9. To insert a device specific module below the PROFIBUS master object, select
the PROFIBUS master object.
10. Right-click on the mouse and select New Object.
11. Browse to the required device module in the hardware library, e.g.
ABB_TFx12_Temp1.
12. Enter the position number of the module placed, e.g. 0, in the name box.
13. Click Create.
14. Repeat steps 9 to 13 until all of the desired modules have been inserted on the
master object, if applicable.
The device modules are inserted both in Plant Explorers Control Structure and in the
Control Builder M project.
Figure 141. Select PROFIBUS specific device module
Position number 0 means slot number 1. Specific device module to be related to
the slot number. Additional information about slot number can be found in
corresponding Device Type release notes.