Product specifications

Device Management FOUNDATION Fieldbus
284 3BDS011222-510 B
d. The signal dialog is now opened. Check the settings in the dialog. It is
recommended to use the default setting Auto for Data Type and Usage.
These settings will be defined during the commissioning process.
e. Confirm these settings by means of Apply.
f. Select the Host by which the signal shall be used in the Used by area of the
signal Properties dialog.
g. Conclude it with OK.
h. Insert another FF signals accordingly (see Figure 169).
Table 11. FF Signal Settings
Data Type Auto
Analog
Discrete
Usage Auto
H1
HSE
The Host must be reserved by the user to enable the configuration of signal
usage by the Host.