Product specifications

Device Management FOUNDATION Fieldbus
296 3BDS011222-510 B
The live list is divided into two sections (refer to Figure 176). The H1 devices
actually present in the H1 link are listed in the right-hand section. The left-hand
section contains a list of the configured H1 devices.
10. Select an active H1 device in the right-hand section and use the mouse to drag
it to the configured H1 device in the left-hand section which contains the
configured data for the active H1 device.
The tag name is written to the H1 device and the bus address of the H1 device
set during the device assignment. The device ID is read out of the H1 device
and stored in the Fieldbus Builder FF database.
11. Repeat this process for all H1 devices in the H1 link and for further H1 links
and linking devices if required.
Step 4b: Commissioning
After all the requisite FF devices have been assigned, the FF Application can be
loaded into the individual FF devices and the OPC Server FF following the
description below.
Figure 176. Device Assignment
You can also carry out the device assignment by selecting an H1 device and
opening the H1 Live List by means of Object > Assign device.... Select the H1
device to be assigned from the list and start the device assignment with Assign.