Product specifications

Section 2 Configuration Control Structure
3BDS011222-510 B 31
The AC 800M OPC Server needs to be configured separately. For more information
on configuration of AC 800M OPC Server, see System 800xA Control and I/O, OPC
Server for AC 800M, Configuration (3BSE035983*).
Create Control Application
The project created according to Create Control Network, Control Project and
Controller on page 28 provides one control application by default. To add an
additional application object to this project:
1. In Plant Explorer switch to the Control Structure.
2. Right click the Applications object below the corresponding Project object.
3. Click New Object....
4. In the New Object dialog accept the selection Control Application, change /
edit Name and Object Description.
5. Press Create to create the new application object.
Insert Application Libraries
To be able to use a certain standard (or user defined) control application library you
have to insert it into your project:
1. In Plant Explorer switch to the Control Structure.
2. Select the project object.
3. In the aspect list of the project object right click the Project aspect.
4. Click Config View.
5. In the <projectname>:Project dialog select the Libraries tab.
6. Press Insert.
7. In the structure browser of the Select a Library dialog browse to the required
library, for example Object Types\Control System\AC 800M/C
Connect\Libraries\ProjectObjExtLib 2.3-4 and select it.
8. Press OK to insert this library and all libraries it depends on into your project.
9. Click Apply.