Product specifications

Control Structure Section 2 Configuration
32 3BDS011222-510 B
10. Press Close on window level leave the dialog.
Repeat Step 6 to Step 9 to insert other libraries needed.
Connect Application Libraries
To be able to use a standard (or user defined) control application library inserted
into your project in an application you have to connect it your application:
1. In Plant Explorer switch to the Control Structure.
2. Select the application object.
3. In the aspect list of the application object right click the Application aspect.
4. Click Config View.
5. In the <applicationname>:Application dialog select the Libraries tab.
6. Press Connect.
7. From the list of libraries in the Select a Library to Connect dialog, select the
required library, for example ProjectObjExtLib 2.3-4.
8. Press OK to insert this library.
9. Click Apply.
10. Press Close on window level leave the dialog.
Repeat Step 6 to Step 8 to connect other libraries needed.
Create and Configure Controller
The project created according to Create Control Network, Control Project and
Controller on page 28 provides one controller by default. To add an additional
controller to this project:
1. In Plant Explorer switch to the Control Structure.
2. Right click the Controllers object below the corresponding project object.
3. Click New Object....
4. In the New Object dialog select the controller type, change / edit Name and
Object Description.