Product specifications

Section 2 Configuration Control Structure
3BDS011222-510 B 33
5. Press Create to create the new controller object.
6. Right click on the Hardware object below the new controller object.
7. Click New Object....
8. In the New Object dialog browse to Object Types\Control System\ AC 800M/C
Connect\Libraries\Hardware\BasicHWLib 5.1-0, select the processor module
type (for example PM860 / TP830), change / edit Name and Object
Description.
9. Press Create to create the new processor module object.
To give a controller a unique system identity as required:
1. In Plant Explorer switch to the Control Structure.
2. Right click the corresponding controller object below the corresponding project
object.
3. Click Project Explorer.
4. In the Control Builder M Professional project window right click the already
selected controller.
5. Click Properties>System Identity.
6. Enter the required TCP/IP address of the controller.
7. Press OK.
Create and Configure Task
By default a controller is configured with three Control Tasks: Fast, Normal, Slow.
To add an own task:
1. In Plant Explorer switch to the Control Structure.
2. Right click the Tasks object below the corresponding controller object.
3. Click New Object....
4. In the New Object dialog accept selected type Control Task, change / edit
Name and Object Description.
5. Press Create to create the new task object.