Product specifications

Section 2 Configuration Control Structure
3BDS011222-510 B 39
6. Browse to the required S800 module, e.g. AI895.
7. Enter the slot number of the module placed, e.g. 1, in the Name box.
8. Click Create.
The module is instantiated with the slot number in Control Structure of Plant
Explorer as well as in Project Explorer of Control Builder M Professional.
Repeat steps 4 to 8 until the needed modules are created.
Bulks of hardware units you can create using Bulk Data Manager.
Open Project
To open a Control Builder M on a Project:
1. Open Plant Explorer.
2. Switch to the Control Structure.
3. Browse to the Control Project object.
4. Select the Control Project object.
5. Right-click on the mouse and select Open Project.
Reserve Project
1. Open Plant Explorer.
2. Switch to Control Structure.
3. Browse to the Control Project object.
4. Select the Control Project object.
5. Right click on the object.
S800 local I/Os always start at slot 1.
For more information on S800 modules and their instantiation, refer to System
800xA Control and I/O, Basic Control Software, Introduction and Configuration
(3BSE035980*) and the hardware related manuals on S800 I/O.
Reserve Project gives exclusive modify access for the project entity to the
reserving user.