Product specifications

Accessing 800xA via OLE DB
3BDS011222-510 B 475
To fill this, perform the following steps:
1. Browse for the object, or write the full path for the object in the Object Path
area. If you choose to browse you will get a new dialog box according to
Figure 289.
2. Select aspect in the Aspect Name drop-down menu.
3. Select property in the Property Name drop-down menu.
4. Select log from the Log drop-down menu.
5. Fill in the time period from which you want to take data. You must use OPC
time notifications as mentioned in the previous section.
These first steps are mandatory. If you choose to store the data by clicking on the
Apply button and not to give any more specific information about the reading, you
will have a raw reading of all values in the log. The next step is to:
6. Choose if you want to do a raw reading or a processed reading, by selecting one
of the Read Options radio buttons.
Figure 289. The Dialog where you Browse for the Object.
Slash characters, “/” and “\” are not supported in object and aspect names being
historized.