Product specifications

Control Logic Section 2 Configuration
54 3BDS011222-510 B
transition symbol, but no step symbol and optional action diagrams. The jump
symbol defines the step name to jump to. A step, which is a jump target,
displays an additional arrow. Even if the step is target for multiple jumps, there
is only one arrow displayed. At the step itself there is no indication, where the
jump comes from.
• Simultaneous Sequence.
The divergence and convergence of simultaneous sequences is indicated by a
double horizontal line. Only one common transition symbol is possible, above
and below the double horizontal line of synchronization.
Editing Overview Diagram
To open and edit the Overview Diagram of the sequence:
1. Right-click on the sequence symbol.
2. Click on Goto Child Diagram. The grid-structured Overview Diagram opens
and is shown as a workbook tab. (If workbook mode, as given by default, is
switched on). A first step symbol inserted.
3. Click on the Step1 symbol and Drag it into another cell, for example B2.
4. To rename Step1 to Fill:
a. Right click on the step symbol.
b. Click Aspect Properties....
c. In the Component tab of the Aspect Properties dialog edit the name and
press OK.
5. To add the transition to follow step Fill:
a. Select the required port.
b. Right-click and select Insert Transition from the available context menu.
c. In the New Component Name dialog enter transition Name, for example
Filled, Number and Description or accept the given defaults.
d. Press <Esc> to quit insertion mode.
6. To add the next step to follow the transition Filled: