Product specifications

Section 2 Configuration Control Logic
3BDS011222-510 B 55
a. Select the required port.
b. Right-click and select Insert Step from the available context menu.
c. In the New Component Name dialog enter step Name, for example
Agitate, Number and Description or accept the given defaults.
d. Press <Esc> to quit insertion mode.
7. Repeat steps Step 5 and Step 6 to add a transition Agitated and a step Drain and
repeat Step 5 to add a final transition Drained.
8. Connect the output port of each step to the input port of the next transition and
connect the output port of the final transition to the input port of the first step:
a. Click on the output port, keep the mouse button pressed.
b. Drag the mouse pointer to the input port.
c. Release the mouse button.
9. Press Save.
As an alternative to editing single steps and transitions you can use the Create
multiple transitions/steps button of the Sequences toolbar. As an alternative to
connecting steps and transitions by mouse you can right click on a step or transition
and click on Goto/Connect..., and connect using the Goto / Connect to dialog.