Product specifications

Alarm and Event
74 3BDS011222-510 B
display. The aspect placed at the top in the default precedence list will appear
instead of an aspect which has a lower position in the precedence list in the
case that both these aspects are available for the object left-clicked on.
4. Library Structure/Preferences&Customization/Default Precedence List; push
the button Add key and find the key MyKey in the list. Move MyKey to the top
of the default precedence list by using the arrows.
5. Add this key to MyFaceplate by going to the locked library and the actual
object type in the Object Type Structure.
6. Right-click on the aspect MyFaceplate and select Properties. Under the tab
Aspect Details, select MyKey in the pull down list Overrides.
7. Each time an object instance of this object type is selected, the key MyKey will
cause the faceplate MyFaceplate to come up with the selected wanted view
layout.
Change of faceplate view for different type of motors
1. Create two object types, one for the small motor and one for the big motor.
2. Use the technique described in Change of default faceplate aspect above.
Alarm and Event
Default Alarm and Event List Configurations
There are default Alarm and Event Lists located in the Library Structure, refer to
Figure 17. These default configurations are delivered with the system and are used if
no other configuration is defined either in a new group in the Library Structure or as
a local configuration, refer to Create a Customized Alarm and Event List
Configuration on page 77.
It is recommended to create an extension library (connected to the released
library) and assign all new faceplate aspects to this library. Refer to Extension
Libraries on page 566 for information about how to use the extension libraries.
Use the Aspects tab of the Extension Library Version Definition aspect to assign
the faceplates to a new library. If a new standard library version is received, create
a new version of the extension library to copy the faceplates to the new base
library version.