- Kitchen Appliance Manufacturer Clothes Dryer User Manual

Reversing The Door
The door on the dryer can be positioned either with the left or right hand
hinging, as shown in fig.6.
Please note: power tools must not be used when reversing the door.
How to reverse the door
Open the door
Undo screw A, remove switch strike B and replace screw A.
Remove screws C and latch plate D.
Remove hinge cover screw E.
Close the door.
Pull hinge cover F forwards to remove it.
Remove two outer screws G.
Remove door.
Fit latch plate D with screws C.
Reverse the door and fit to the dryer in the closed position.
Refit screws G and hinge cover F.
Open the door.
Fit screw E to secure hinge cover.
Remove screw A at the top of door and refit switch strike B as shown.
7
fig. 6