Specifications

13
Wash temperature selection
Each selected programme has its own preset wash temperature, as
shown in the programme listing below.
If you press the “Wash Temperature” button the currently set
temperature will show on the display. You can change the wash
temperature if required by pressing the “Wash Temperature” button a
number of times. If you miss the temperature you want you can come
back round to it again by pressing a few more times.
Extra functions
Extra functions can be selected once the programme has been set.
To select any extra function, press the required extra function button.
The programme table on page 16 shows the functions available for
each programme. The programme time shown on the display will
reduce or increase, according to the extra functions selected.
Delay timer
A delay of up to 24 hours can be added to the end time in half hour
increments to allow the wash programme to finish at a convenient
time. The delay time is to the end of the wash programme not the
start of the programme.
The “Delay Timer” function is not available for the “Spin” programme.
To set the delay timer:
• Press the “Delay Timer” button.
• Pressing the “Delay Timer” button again increases the delay by 30
minutes for each press, up to the maximum of 24 hours.