Specifications

• Once the required time delay is shown on the display, the washing

machine will set after approximately three seconds delay.

Extra rinse

This function adds up to 3 extra rinse cycles to the programme,

which is ideal for large loads and garments belonging to people

with sensitive skin. Please note: this function will increase the water

consumption.

Press the “Extra Rinse” button once to select one extra rinse, the

display will show “P--1”.

Press the “Extra Rinse” button again to select 2 extra rinses, the

display will show “P--2”, a further press of the “Extra Rinse” button

selects the maximum of 3 extra rinses with the display showing “P--3”.

The “Extra Rinse” light is illuminated and ﬂashes during the

programme, “P--1/2/3” is displayed, alternating with the remaining

programme run time.

Intensive

Pressing the “Intensive” button before starting a programme selects

this function. This increases the washing time during the main wash

stage of the programme and is ideal for washing dirty loads.

Dry

This function adds a drying cycle to the end of a programme. The

drying cycle adds 2 hours to the duration. The display shows the full

duration of wash and dry cycles.

This function is only available on certain programmes - see

programme listing on page 16.

Note: If the machine is ﬁlled to its full capacity for some wash cycles