Specifications

15
9) Refit the motor unit to the main body
of the downdraft extractor. This may
be positioned with the outlet facing
vertically upward or downward.
10) Connect suitable ducting to the
extractor outlet. See page 11 for
ducting requirement details.
11) Position the metal box containing
the electronic components in the
cabinet, no closer than 65mm to any
gas operated hob and no closer than
65mm to the extraction outlet.
We recommend installing the box
containing the electronics at least
10cm above floor level and at a
suitable distance from all sources of
heat (e.g. oven sides, hob base).
12) Plug the 9 pin electrical connector
from the electronic box into the
downdraft body, being careful to
orientate it correctly (Fig. 10).
13) Lift the downdraft moving panel and
remove the door block (Figs. 11, 12 &
13).
Fig. 11
Fig. 12
Fig. 10
Fig. 13