manual

23
fig. 19
Fitting guides
Under end face
of fascia
of appropriate length. Please take
care to ensure the screws selected
will not punch through the fascia door.
4. Remove the fitting guides.
5. Attach the fascia door assembly
to the refrigerator (onto the height
adjustment screws) and loosely fit the
securing nuts. At this stage the final
vertical and horizontal position of the
fascia assembly may need adjustment
(figure 17).
6. Check and align the position of the
fascia door, as shown in the next
section. When done, secure the
fascia in position using the lower
fascia fixing brackets and supplied
screws (figure 18).