manual

Booster

• The hob is equipped with a booster function on the front left and

front right zones, allowing a higher power level than the maximum

for approximately five minutes. To turn on the booster function,

touch the zone display for the required zone then touch . “P” will

show in the zone display whilst the booster is on. To cancel the

booster at any time, touch the zone display to activate the slider,

then set the required power level.

Auto-heat

• Every zone is equipped with an auto-heat function, which reduces

the warming up time for the zone. To turn on the auto- heat

function, touch the zone display for the required zone, then set the

power level to “9” using the slider control.

• Touch the “9” position on the slider control again and the display

will alternate between “9” and “A”.

• Then select the power level required. The display will alternate

between the set power level and “A” for a preset period of time,

before reducing the power to the level required.

• If no final power level is set, the auto heat is switched off and the

zone will remain on power level “9”.