Stainless Steel Sinks Installation Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu www.cda.
Installation Before installation Offer up the sink to the worktop and/or the cabinets to confirm that the external dimensions of the bowls are compatible with the cabinets themselves. Confirm that with the sink in position: • There is adequate space to install any taps or other required accessories. • There is adequate space to install the waste pipework and that any necessary modification to internal shelves to accommodate the waste (and trap) is acceptable.
• A fter positioning the sink on the worktop, position the fixing brackets as shown in Fig. 2, then tighten their screws. • Do not use a power tool to tighten the screws; by using a hand tool it is easier to ensure that they are tightened just enough to clamp Fig. 2 down on the worktop and no more. • After fixing, remove any excess gasket material with a suitable cutter. • We recommend a thin bead of silicone sealer is applied around the perimeter as added protection against water ingress.
Please contact our Customer Care Department for Service on the details below Customer Care Department The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu www.cda.
