Operating instructions
Code reading systems
Hand-held reading systems
SIMATIC MV320
5/36
Siemens ID 10 · 2014
5
■
Overview
SIMATIC MV320 is a rugged, powerful industrial barcode and
data matrix reader suitable for high resolutions. The handheld
reader reads two-dimensional (2D) data matrix codes and one-
dimensional barcodes. It can read medium to high contrast data
matrix codes. The cell size should be larger than 0.13 mm. Bar-
codes can be read if the width of a bar is larger than 0.12 mm.
The reader possesses complex image processing functions and
illumination technology in order to read codes on many different
surfaces.
The SIMATIC MV320 handheld reader is suitable for wired com-
munication. Thanks to the varied interface technology (USB,
RS232), simple integration into your application is possible with
the device.
The SIMATIC MV320 handheld reader is supplied as a package
including USB cable. A separate package comprising cable and
power supply is available for use as an RS232 version.
■
Design
Rugged ergonomic handle with integral strain relief
The SIMATIC MV320 handheld reader has a monolithic product
and thus extremely rugged. The only replaceable component is
the cable that is connected to the reader with protected strain re-
lief but can nevertheless be easily replaced for the purpose of
changing the interface technology.
■
Integration
The SIMATIC MV320 handheld readers can communicate with
the host computer by means of RS232 and USB. No special soft-
ware is required for this purpose. The SIMATIC MV320 is config-
ured by reading supplied data matrix codes.
The handheld reader can only be operated via RS232 and USB
for direct transfer of the codes to the host computer. Batch mode
is not possible.
■
Selection and ordering data
Order No.
SIMATIC MV320
Rugged industrial barcode and
data matrix reader with 1.8 m USB
cable
6GF3320-0HT01
Accessories
USB cable 6GF3320-0AC02
1.8 m long, not spiraled
RS232 cable 6GF3320-0AC03
2.4 m long, spiraled
Power supply unit
• For the USA
6GF3020-0AC40-0AP1
• For Europe
6GF3020-0AC40-0AP2
Metal stand 6GF3320-0AC07
ID10_2014_EN_NEW.book Seite 36 Mittwoch, 11. Dezember 2013 11:05 11
© Siemens AG 2013