Operating instructions

ManualsBrandsCDA ManualsMicrowave OvenMV440

Code reading systems

Hand-held reading systems

SIMATIC MV325

5/37

Siemens ID 10 · 2014

■

Overview

SIMATIC MV325 is a rugged, powerful industrial barcode and

data matrix reader suitable for high resolutions. It reads two-di-

mensional (2D) data matrix codes and one-dimensional bar-

codes.

Medium to high contrast data matrix codes can be read. The cell

size should be larger than 0.13 mm. Barcodes can be read if the

width of a bar is larger than 0.12 mm.

The reader possesses complex image processing functions and

illumination technology in order to read codes on many different

surfaces.

The SIMATIC MV325 handheld reader is suitable for wireless

communication. Thanks to Bluetooth interface technology, sim-

ple integration into your application is possible with the device.

The handheld reader is supplied as a package including charg-

ing station and USB cable.

■

Design

The SIMATIC MV325 handheld reader has a replaceable battery

pack and is extremely rugged. The only replaceable component

is the battery that can be charged together with the reader or in-

dividually in the charging station.

■

Integration

The charging station of the SIMATIC MV325 handheld reader

can communicate with the host computer by means of USB.

No special software is required for this purpose. The SIMATIC

MV325 is configured by reading supplied data matrix codes.

The SIMATIC MV325 handheld reader itself communicates via

Bluetooth with the base station. No special software is required

for connecting a handheld reader with a specific charging sta-

tion since the SIMATIC MV325 is connected with the charging

station by reading a unique code on the charging station.

The code contents read are automatically transferred to the

charging station as soon as a wireless connection is estab-

lished. If the connection to the charging station is not estab-

lished, the read results are buffered in the mobile section (if this

function is activated). This operating mode is referred to as

batch mode. As soon as the connection to the charging station

is restored, the read results are automatically transferred.

■

Selection and ordering data

Order No.

SIMATIC MV325

6GF3325-0HT01

Rugged industrial 1D and 2D code

reader (e.g. barcode and data

matrix), with charging station and

USB cable. With Bluetooth wireless

interface and charging station with

USB host interface

Accessories

Charging station 6GF3325-0AC03

Charging station with USB host

interface and Bluetooth wireless

interface. With USB cable (0.9 m).

Battery 6GF3325-0AC07

Lithium ions (1300 mAh;

50,000 charging cycles)

ID10_2014_EN_NEW.book Seite 37 Mittwoch, 11. Dezember 2013 11:05 11