Operating instructions

Code reading systems
Introduction
Code Reading Systems
5/4
Siemens ID 10 · 2014
5
Verification systems
By using verification systems, the readability of marks is guaran-
teed throughout the entire production process, regardless of any
possible contamination or when using different readers. More-
over, the marking can continue to be read after the production
process throughout the lifespan of the product.
In addition to reading 1D bar codes and 2D matrix codes,
SIMATIC MV440 can be expanded at any time with verification
functionality using the "Veri-Genius" verification license. The
license is supplied as a "Single License" on a USB stick and can
be copied to the SIMATIC MV440 with the SIMATIC Automation
License Manager (ALM) using a plug-in. The license is execut-
able on any SIMATIC MV440 as of firmware version 4.0.
Optical character recognition
With the "Text Genius" OCR license, SIMATIC MV440 can also be
used for optical character recognition (OCR) in addition to read-
ing 1D bar codes and 2D matrix codes. It is also possible to read
and compare plain text and machine-readable code in the same
image field.
The license is supplied as a "Single License" on a USB stick and
can be copied to the device with the SIMATIC Automation
License Manager (ALM) using a plug-in. The license runs on ev-
ery SIMATIC MV440, firmware version 3.0 or higher.
Object recognition
With the "Pat Genius" object recognition license, SIMATIC MV440
can also be used for object recognition (object classification,
position detection, counting, etc.) in addition to reading 1D bar
codes and 2D matrix codes. In addition, the functionality is pos-
sible in combination with text recognition, for example, thus en-
abling position control of a label and control of the labeling
(reading and comparison) of plain text in an image field.
The license is supplied as a "Single License" on a USB stick and
can be copied to the device with the SIMATIC Automation
License Manager (ALM) using a plug-in. The license runs on ev-
ery SIMATIC MV440.
ID10_2014_EN_NEW.book Seite 4 Mittwoch, 11. Dezember 2013 11:05 11
© Siemens AG 2013