Operating instructions

ManualsBrandsCDA ManualsMicrowave OvenMV440

Code reading systems

Verification systems

Veri-Genius for MV440

5/40

Siemens ID 10 · 2014

■

Overview

Marking a product is normally done very early on in the produc-

tion process so that all following steps can be controlled using

the product identity.

By using verification systems, the readability of marks is guaran-

teed throughout the entire production process regardless of any

possible contamination or when using different read devices.

Moreover, the marking can continue to be read after the produc-

tion process throughout the lifespan of the product.

With the verification license "Veri-Genius", devices of the

SIMATIC MV440 family can be used for checking the marking

quality of codes (verification) in addition to reading 1D barcodes

and 2D matrix codes.

The license is supplied as a "Single License" on a USB flash

drive and can be installed via the SIMATIC Automation License

Manager (ALM) on any reader of the SIMATIC MV440 series. The

license is executable on a SIMATIC MV440 as of firmware ver-

sion 4.0.

■

Benefits

Support for all important sectors and code types through the

following verification standards:

• ISO TR 29158 (previously AIM DPM-1-2006)

- Code type: Data Matrix Code

- Type of marking: All - focus on DPM, e.g. dot-peened and

lasered markings

- Industries: All - focus on DPM, e.g. dot-peened and lasered

markings

• Siemens DPM

- Code type: Data Matrix Code

- Type of marking: All - focus on DPM, e.g. dot-peened and

lasered markings

- Industries: All

• ISO/IEC 15415

- Code type: Data Matrix Code

- Type of marking: Printed

- Sectors: All – focus: Pharmaceutical industry

• AS9132 Rev. A (previously IAQG)

- Code type: Data Matrix Code

- Type of marking: Printed

- Sectors: All – focus: Aerospace

• ISO/IEC 15416 (previously ANSI X3.182-1990)

- Code type: Barcode

- Type of marking: Printed

- Sectors: All - printed labels

Further highlights

• Different resolutions are available (640 x 480 pixels,

1024 x 768 pixels and 1600 x 1200 pixels)

• License includes calibration card

• Simultaneous reading and verifying in one image field

• Flexible retrofitting of the license to each device of the

SIMATIC MV440 series via the Automation License Manager

of SIMATIC – advantage: Savings in stocking of spare parts

• Simple integration of verification in the automation environ-

ment via SIMATIC MV440 using a function block (FB79 and

FB45)

ID10_2014_EN_NEW.book Seite 40 Mittwoch, 11. Dezember 2013 11:05 11